INFORMATION


Hello users "The x8tool is not working properly" sorry for that,Try to download "superoneclick" software to root ur mobile which is in xda forum,I will update it soon to our blog Thanks for reading,,,,,,,,,,..........
.

Tuesday, May 21, 2013

HOW TO USE SDCARD AS RAM TO OUR ANDROID MOBILES.........



Hai Friends, am going to tell you

HOW TO USE SDCARD AS RAM TO OUR ANDROID MOBILES.........

Its very simple and it works great.

we need

1.sdcard but class 4 or higher SD Card will give excellent speed to your Phone.(best use 4gp or higher sdcard)
2.Rooted Android Mobile or Tablet.
3.Card Reader.
4.Minitool Partition Wizard software.


I previously post about the updation of android 2.1 to 2.3, or higher.
I face a major problem as performance low,
so this post is solve that.
Go ahead for custom rom.



Note For Users: This method mostly worked in all Machine Devices; Internal Memory Trick will work on all devices but Ram Increasing method is dependent on your phone’s ROM. check whether Swapping is supported by your phone's ROM or not.
(just Google it as your ROM name with “a2sd help” or “swap help” or a touch similar to this for more specific information about your Device’s ROM,.  Don't do before knowing about your rom. )

so sony w8 or x8 stock rom does not support the swapping.

but we update it to custom rom, it will support.

my device is: sony w8.
am using minicm7 shakira rom which supports swapping.

K lets Starts,..

Note: Backup your important data from sdcard to your pc or some other device.
One Important Thing Make sure Your Mobile is rooted.


Download the Mini tool Partition Wizard and install it to your pc.

Insert your sdcard to your pc by using card reader, 'don't use usb cable'.

Watch the below Video for get an idea about partition
Change your video qaulity to minimum 360p for better clarity





After partition put your memory card to your mobile.

Now goto setting-->CyanogenMod-->performance-->A2SD(ext)setting-->available modes--> click,,->a2sd.
it ask root permission.
Then Reboot the Device.

Now we need Swapper 2 application
for swap the sdcard as RAM.
The Link for Swapper2 is: Swapper2
Download the application from Google play.,
and install it.

Then open the Swapper2 application
Don't Click ON Button Before Setting up.
Press the Menu Button and 
Goto Setting-->
1.Tick Run swapper at startup.
2.Set /sdcard/swapfile.swp in swap place.
3.set the swap size whatever you want, i set as 256mb ram in Swap size.(you set according to your swap partition size)
4.set swappiness whatever you want from 10 to 100.
5.Tick Safe Unmount.
6.Tick Safe Remount.





Goto Advanced Preferences.
7.Tick Use Swap partition.
8.Tick Recreate swap file.
9.Tick Reformat swap.






Now Come back.
Click the ON Button it ask root Permission.
Thats it, Now your Mobile used this swap file as RAM for your mobile.


Let Now Check it whether it works or not.
Open the Terminal Emulator
Type su    Then
Type free
It show the memory of the sdcard.
In that see the swap,
if it show as 0  0   0 like that.
It means your swap is not working

see the below picture you get an idea.
it show the swap working.







See the Last line of the above picture
                  Total     used     free
It shows the swap 297436   71804    225632 
its working.

Instead of that     0        0         0 shows like
this means its not working.


Thanks for Reading...
by

Sathish Nagarajan



Tuesday, February 12, 2013

HOW TO UNLOCK BOOTLOADER AND UPDATE NEW ROM


HOW TO UNLOCK BOOT LOADER AND UPDATE NEW ROM.


1st ROOT  MOBILE.

2nd INSTALL BUSYBOX.

3rd DOWNLOAD THE XRECORY AND MOVE THAT TO SDCARD.

I Have Already Explain Deeply about these 3 Steps in my previous post. 
So If you have any doubt see my previous post.

ok before that 
i have already shown about how to update the android os on my previous post.
Here is also i am going to tell about the updation of android os.

But what is the Difference between that and this.

ya, here we are going to unlock the boot loader.

By unlock boot loader, it is used for change the kernel
By changing the kernel, we have install the latest rom even android v4.1(Jelly Bean)
By Unlock boot loader and changing kernel the mobile will work good and fast.
We are going to totally change the OS.

IT IS LITTLE RISKY TOO, ITS VOID YOUR WARRANTY.
CAUTION: SO I AM NOT RESPONSIBILITY OF ANY PROBLEM.
BUT I HAVE DONE AND ITS WORKING SUPERB.
SO U HAVE TO INSTALL VERY CAREFULLY ON EACH STEP.

For ur convenient i have attach link blow:
To Root We need    : x8Toolbox
Password for x8toolbox.zip file is: "irukaveandiyathutha"
While rooting turn off your antivirus.
To know about How to ROOT see my Previous blog. u must root for further move.
Install Root Explorer that also in previous blog.
After that,  Install Busybox From Android Market.

Ok now u have to save the xrecovery file on system/bin.
After install busybox download the : xrecovery  files and move it to ur sdcard.
This is very important step on saving xrecovery files on system/bin.

After dowloading exract the file, it have BUSYBOX, CHARGEMON, CHARGER, XRECOVERY.TAR
Send the four file to sdcard from your computer.
Then open the Root Explorer V2.19 which is already you installed.
Goto sdcard copy the BUSYBOX, CHARGEMON, CHARGER, XRECOVERY.TAR where you stored already.
Press the back button, goto system and then bin,  Paste the copied file to system-->bin-->
Next step is very important we want to set the permission for that four files.
If we not set correct permission your mobile will hang on sony ericsson logo during start up.
For each four file we have to set the permission.
Press and hold the file, a popup will appear, In that select the PERMISSIONS.

SEE THE BELOW PICTURE



U HAVE TO SET PERMISSION LIKE ABOVE PICTURE FOR EACH FILE.
For detail Explain see my previous post.

BOOT LOADER:

Here is the Link  For :  BOOT LOADER

Download the boot loader from the above link and extract that.
and Then
Open Boot Loader





In that there is have "msm7227_semc.cmd"   file.
Open that file. (Before that Turn off your antivirus program if you install in your computer.)

Before open that file U have to goto  Setting-->Application-->Development-->TICK THE USB DEBUG.




Because antivirus shows as virus while unlocking. Dont Worry it is not virus.
Now open msm7227_semc.cmd file.

A Command Prompt will open like above picture.


Now Connect the USB  cable to your mobile and ur computer.

After connecting, Click any key to continue......
It will unlock ur mobile in few Seconds.  


FLASH TOOL
Next We Need flash tool
Flash tool is used to flash the kernel.
Here Is the Link For:  FLASH TOOL.exe
Here is link for rar file : Flash Tool.rar

Now we are going to flash the default kernel.
Before that we need new kernel.
There is have lot of kernel,

But I suggest "nAa kernel v14."
Here is the link for:  nAa kernel v14.

After downloading flash tool and kernel.

Open the Flash tool,  see the below picture.




Extract the nAa kernel v14 file.
Now You have to put the nAa kernel v14 extracted file to firmware folder, i shown below.




The Selected area is the firmware folder, you have to copy the nAa kernel v14 file and paste it
to that firmware folder.


ROM:
Now we need ROM.
I attach the the android 2.3.7 ROM 
which name as: MiniCM7-2.2.1

For all types of roms and kernels click here: Roms and Kernels


After Downloading the ROM send that ROM to your sdcard.
In this ROM we did'nt have Google apps,
Here is the link for : Google Apps
After downloading the Google apps send that zip file to your sdcard.


ICS
kernel : nAa-ICS-kernel-04
ICS ROM: ICS ROM (minicm9)

ok
We
ROOTED THE MOBILE
INSTALLED THE BUSYBOX
SAVED THE XRECOVERY FILE.
UNLOCKED THE MOBILE USING BOOT LOADER.



Now We are going to flash the Default Kernel and install the new kernel.
Open the Flash tool you already download and Extracted.

Click the X10FlashTool.exe in that folder.


 A popup will appear: 



Click the Flash Button, on the top Left corner.




A another popup will appear.

Select the nAa-14 kernel. which is selected in the above picture.
Before Clicking the OK button.
you have to goto.....   Setting-->Application-->Development-->TICK THE USB DEBUG.

Now switch off your mobile. (make sure you have send the MiniCM7-2.2.1 ROM and Google apps to your sdcard.)

Connect the USB cable to your computer. (dont connect to mobile until it says.)
Now You have to click the OK button.
After clicking a popup will appear. seen below.



Then press the back button and hold it,  and then Connect the USB cable to your mobile.
Less than a 5sec it flash your old kernel and install the new kernel.



After install unplug the USB cable.


Now as usual
Turn on your mobile.
This time you did'nt get Sony ericsson logo.
Apart from that you can able to see nAa logo.
If you seen the nAa logo while turn on, then press the back button multiple time until it goto Clockwork mode.

After enter the Clockwork mode use volume button to scroll up/down and home key to select.


select the FACTORY RESET(some thing like that)--> YES (to reset the custom rom)

Then goto INSTALL CUSTOM ZIP-->CHOOSE CUSTOM ZIP FOM SDCARD-->select MiniCM7-2.2.1-shakira.ZIP by using home key, ( you can choose what ever rom you like).
Now your rom will installed it may take some time.

After install sucessfully, reboot your device.
Again you have to come to clockwork mode. (by pressing back button multiple time.)
To install Google apps.
Now goto INSTALL CUSTOM ZIP-->CHOOSE CUSTOM ZIP FOM SDCARD-->select gapps-gb-20110828-signed.zip by using home key.

After install sucessfully, reboot your device, 1st start up may be take some more time.
This Rom works very fast.
To work fast goto Setting-->Display-->Animation--> select the No animation.
After that goto Default Browser-->Setting-->Enable plugin--> tick OFF.
If you done this 2 steps, your mobile will works fast.

Here is Some Screenshot of MiniCM7-2.2.1-shakira ROM.




















I hope it may helpfull to you.
Thanks..........


sathish kumar

Saturday, January 19, 2013

HOW TO GET THE DEFAULT OS IN SONY MOBILES



HOW TO GET THE DEFAULT OS IN SONY MOBILES BY USING SONY PC COMPANION.



Now I am going to tell how to update our mobile to older os if, the mobile has any problem or hang,

1 : Install Sony PC Companion,
  Here is the link : Sony pc Companion




2 : After Install

Click START on Support Zone






A next Window will open, in that Click START on "Phone Software Update"






3 : Repair Phone

A Another Pop Will Appear

In That dont Click the Connect Button,
Just Click the "REPAIR PHONE"  as shown below






4 : After Clicking Repair Phone
A new Pop will apperarin that they shows,
1. Start
2. Prepare
3. Update
4. Finish

Dont Bother about that Just Simply Click CONTINUE. as shown below




A new pop will apperar now, 
Just Tick the box, and click the NEXT button as shown below,



Now it prepare to Download the Software, wait Until it finish the download.

i shown the picture below




5 : After Downloading They Ask to Select your Mobile Model.
Now U have to Select your Mobile model. I shown the Picture below,
NOTE : Until this step Dont Connect your mobile to pc companion, that means dont insert your usb cable.





6 : After Selecting Your Mobile Model A new pop will appear.
This is the Important step.
If your mobile hanged means,
just switch off your mobile or replug the battery it will goes to switch off stage.(dont forget to connect the battery)
Now take the usb cable, connect to your computer and
Before connecting to your mobile,
Just PRESS AND HOLD THE BACK BUTTON
And then connect the usb cable to your mobile, a sound appear, now your mobile ready to get the default os.
then release your hand from back button.
After Finish Installing os, Switch off your mobile wait for 5 sec, then on. 1st start may slow.





Hope U may Understand.

sathish kumar